Tuesday 20 January 2015

Applying EASYJoint in Cold Weather

Applying EASYJoint in cold conditions - azpects.co.uk


EASYJoint can be used in virtually all conditions including rain and light snow. 


If torrential rain is forecast it would be beneficial to cover the area to prevent any possibility of the compound being washed out by the force of the rain.

Once EASYJoint has been applied it will not be compromised by cold and freezing conditions. Cold & wet conditions will increase the setting time considerably - freezing weather will cause the process to virtually cease & it can take many days for the joints to set hard. However, it will eventually set & the weather will not have impaired its qualities in any way.  EASYJoint can take up to 3 weeks to gain maximum hardness & strength.

In freezing conditions, EASYJoint can be applied using the Dry Application method. There is a greater risk of staining or ‘picture framing’ with this method but the effects can be lessened by sealing the paving first.  Our experience has been that if any marking occurs it will weather over time & eventually fade away. Azpects have a range of easy to use sealers to meet your needs  -  visit our website to find out more: http://azpects.co.uk/sealers-and-protectors.aspx

As water can turn to ice in freezing conditions, we strongly recommend you avoid the wet application process. If ice has formed in the joint prior to installation avoid using EASYJoint until the ice has melted.

If your intention is to use the wet application method, ensure that ground temperatures are greater than 3 degrees Celsius.

To access our instructional guides for our dry application and wet application methods, please visit our instructional website: easyjoint.eu/

For information on all our products including EASYJoint visit: azpects.co.uk/products.aspx

Written by Jeff Carter; employee Of Azpects Ltd (plus ex Landscape Gardener and Paving Centre Manager) 

No comments:

Post a Comment